Description:
Resistance Spot Welder VAS6535 The resistance spot welder VAS 6535 features a central connection and a tool detection function. An impedance measurement is used to regulate the welding parameters automatically. In this way, a constant level of quality of the weld points is assured.
With VAS 6535 it is possible to store the weld processes and to document them. Disturbance variables such as dirt, adhesive etc. are detected and compensated for. A compact flash memory card allows the software of the unit to be updated at any time.
Note:
- Recommended fuse protection at least: 63 A.
- For a compressed air pressure of less than 8 bar you must order VAS 6535/2 also.
- Mobile resistance spot welder with inverter technology, can be updated, features impedance measurement and welding parameter regulation.
Technical data:
- 661mm (26") x 661mm (26") x 1372mm (54") Weight: 171 kg (376 lbs.)
- Power Supply Unit Mains connection: 208 - 240V 3Phase
- Mains connection lead ø/length: 6mm2 / 10 m Fuse protection at least:
- 60 A delay Mains frequency:
- 60 Hz Mains connection output:
- 42 kVA Rated output at 50% ED: 60 KVA Idle voltage max.:
- 23 V DC Welding current regulated:
- max. 12,000 A DC Water tank volume:
- approx. 32 l Ambient temperature:
- 40 C° Type of protection:
- IP21 X tongs Cable length:
- 2.5 m Welding current:
- max. 12,000 A DC Weight of tongs without cables: 8 kg
Includes:
- Mobile mains unit
- X tongs
- Welding gun
- Quick dent removal hammer
- Linear balancer
- Cooling Unit Heat Exchanger
- Special VAS Welding Programs
Recommended accessories:
- VAS6535/1 Resistance Spot Welder Accessory Pack
Warranty:
24 Months
Manufacturer:
Elektron
Supplied by:
Snap-on Business Solutions 1-800-892-9650