Description A fully automatic diagnostic wheel balancer with 5 cameras and an automatic clamping system. The wheel data is recorded automatically and, in a single measuring run, can detect weight and shape defects, flat spots, and incorrect bead seating, facilitating the diagnostics and speeding up the process. Features - Automatic wheel data entry and balancing mode (weight type and position).
- Automatic identification of the number and position of the spokes for split weight mode.
- Tread depth measurements.
- Tread wear analysis.
- Measurement of tire pull effect (tire conicity).
- Allocation of wheels to the best possible position on the vehicle to avoid tire pull effect.
- Detection of flat spots on the tire.
- Detection of possible tire sidewall damage.
- Detection of bead seat issues.
- Measurements of the Radial and lateral run-out of the tires or rim.
- Intuitive graphical software user interface.
- EasyWeight™ – Pinpoint laser identifies the exact weight placement location.
- Power Clamp™ – Electromechanically clamps the wheel accurately with a constant force.
- Split weight mode – Hides the tape weights behind two adjacent spokes.
- 3D imaging diagnostics screens – The type, size, and position of the defect in the tire are identified.
- The Print-out of all results via USB stick.
Warranty Two years
Product Specification
Rim Width Range |
3”- 20” (76.2mm - 508mm)
|
Wheel Clamping |
Automatic Power Clamp
|
Maximum Wheel Weight |
154 lbs. (70kg)
|
Balancing Speed |
< 200rpm
|
Weight |
485lbs (220Kg)
|
Power Requirements |
230V/1Ph/50-60Hz
|
Maximum Wheel Diameter |
37” (950mm)
|
|