Description The EW1020 10K hydraulic inground lift provides an extra-wide drive-through clearance for servicing wide-bodied and electric vehicles. Its design allows for battery-lowering out of electric vehicles and comes standard with True 3-Stage arms and double-telescoping screw pads. The Quick Check features increases the rise and descent from approximately 41 seconds to 24 seconds! Features - 3-Stage front and rear arms and double-telescoping screw pads
- No Bolster to Drive Over
- The extra width provides technicians enough clearance to remove/install battery and battery packs easily
- Bench mount controls
- Available in Red, Black, or Blue - Must specify color at time of order.
Warranty Click here for warranty information.
Product Specification
| Lifting Capacity* |
10,000 lbs.
|
| Arm Configuration |
3-Stage Front / Rear
|
| Stroke |
72"
|
| Rise Height |
78"
|
| Overall Width |
117-1/2"
|
| Drive Thru Clearance |
88"
|
| Arm Reach |
Min: 20" Max:42"
|
| Screw Pad Height |
4" - 6-1/8"
|
| Plunger Diameter |
8-1/2"
|
| Air Supply Requirements |
90 - 120 PSI
|
| Quick Cycle Motor / Voltage |
3H, 208V - 230V, 1PH, 60 Hz
|
| Rise Time** |
24 Seconds
|
| Maximum Load Per Arm |
2,500 lbs.
|
| Required Ceiling Height |
12'
|
| Recommended Bay Size |
14' Wide x 24' Deep
|
| * |
Lift capacity ratings based on loads equally distributed on all four arms.
|
| ** |
Lifting speed may vary depending on type, viscosity and temperature of oil as well as vehicle weight.
|
|