The pneumatic pop riveter V.A.G 2003 A is required for general body repairs on the Audi A2/Audi A8 (aluminium body).
The pull head was designed to Audi specifications. The riveter allows the following repair work to be carried out:
Application of repair rivets (aluminium pop rivets), e.g. Audi A8, rear side.
In conjunction with VAS 5196 – Removal of rivets only accessible on one side, e.g. Audi A2, side

Important: Only Parts Catalog prescribed pop rivets may be used.
Note: The repair procedure is described in the Workshop Manual Audi A2/Audi A8.

Items supplied:
1 riveter (working pressure 6 bar)
1 pull head
2 pull head wrenches
1 plastic case with box for rivets
2 nozzles for removing punch press rivets, 9 mm
2 nozzles for 100° rivets
2 nozzles for pop rivets with rounded head (4-5 mm)
2 sets of clamping jaws (3 part)
1 rivet pin ejector
2 ejector springs
1 spring pin
1 guide sleeve
1 guide
2 springs

Warranty
24 months

REQUIRED FOR AUDI A8 STRUCTURAL REPAIR CENTERS!