1-800-892-9650 SEARCH
Item Detail

Table of Content High Voltage Vehicle MEB Battery Repair Tools






Image shown may not
be actual product.
Product and price information are
subject to change without notice.
Module Balancer
Model: VAS6910A
Call 1-800-892-9650

Out of Stock - Order now to secure future fulfillment
Notes

AVL Service and Support - Toll Free Local Hotline:

USA            1-833-984-3843

Canada      1-833-945-2880

Email: vas.service@avl.com   AND
             support.ccc@avl.com

Quickstart VAS6910A Rev01
User Manual
VAS 6910A High Voltage Module Balancer Setup with ODIS


This tool will be autoshipped to ALL Audi and Porsche dealers when stock is available.

More and more electric vehicles are coming onto the market and thus sooner or later also into service operations. The previous module balancer perfectly covered the current battery world. But in 2024, new vehicle platforms with a new generation of batteries will be launched. The HV modules are getting bigger, with more cells connected exclusively in series. As a result, the module voltage rises to over 60 volts, depending on the state of charge and model. As a result, the new generation of batteries offers customers more range.

With the new Module Balancer VAS 6910A, you are ready for future customer requirements across all brands. The new VAS 6910A, with its technically sophisticated components, is precisely designed to enable this higher voltage. It is the perfect answer to the new generation of HV batteries and offers additional new functions.

The VAS 6910A is the best solution because ...

  • it offers a higher voltage of up to 400 V, which is necessary for the new battery generation.
  • the charging capacity also increases to up to 11 kW – and is therefore significantly higher than the maximum 2.3 kW of the previous model.
  • it can be used both for the new and for the previous battery generations.
  • it requires no additional software. The VAS 6910A can be controlled entirely via ODIS or PIWIS. This prevents incorrect entries due to manual transfer.
  • your diagnostic tester now only needs to be connected during initialization. During charging and discharging, the test performer can always be used elsewhere in the qualified workshop. The LED displays on the device give information about the conclusion of the process.
  • the voltage balancing device for high-voltage battery module (module balancer) has an intuitive operating concept. Integration into ODIS and PIWIS also simplifies control and makes the entire process reliable for the user.
  • updates are also controlled centrally. Firmware updates to the balancer can be directly initiated via ODIS/PIWIS, consequently combining the necessary update processes.
  • mains power regeneration or feeding power into home storage is now also enabled. Discharging can thus be used in a sustainable and cost-optimizing way. (Country-specific legislation must be taken into account here.)
  • the communication lines of the previous model can also continue to be used on the new device.


Technical data:

Supply from the alternating voltage grid

  • Supply voltage: 200 VAC to 480 VAC (3-phase); 230 VAC to 240 VAC (2-phase)
  • Frequency range: 50 Hz to 60 Hz
  • Power consumption: 11 kW, 16 A
  • Mains voltage fluctuation: +/- 10%
  • Overvoltage category: III
Charging:
  • Max. 11 kW @ 400 VAC (3-phase)
  • 3 VDC to 400 VDC, max. 80 A
Discharging:
  • Max. 2 kW (discharge resistance)
  • Max. 11 kW (mains feedback)(For batteries of less than 20 V, mains feedback is not possible.)
  • 2 VDC to 430 VDC, max. 50 A
Battery monitoring (charging/discharging):
  • Depending on the type of battery module: Analogue measurement of battery voltages and temperatures (0 V to 5 V); Digital monitoring via battery module controller
  • Monitored values are voltages, currents and temperatures.
Weight and dimensions:
  • Net weight: 24.5 kg
  • Gross weight (incl. packaging, pallet, accessories, documentation): 34.2 kg
  • Dimensions: 702 mm × 321 mm × 362 mm (L × W × H)


Scope of Delivery:

  • VAS 6910A/1: Gerät VAS 6910A Module-Balancer
  • VAS622021: Main Power supply cable NEMA plug
  • Quickstart Guide
  • USB-Stick
  • VAS 611 001: USB connection cable (USB 2.0 A to USB 2.0 B Rugged)
  • VAS 6910A/24: Cable set (HV) (connecting cable plus and minus pole including brackets and knurled nuts)
  • VAS 6910/26: Pole cover set (positive and negative)




Tool Requirements

Tool Number VAS6910A
Availability Not Available
Superseded To
Tool Class Test Equip
VW US Requirement Minimum
VW US Auto Ship Number
AUDI US Requirement Optional
AUDI US Auto Ship Number
VW Canada Requirement Minimum
VW Canada Auto Ship Number
AUDI Canada Requirement Optional
AUDI Canada Auto Ship Number
VW MRT Quantity 1
AUDI MRT Quantity 1


Invisible Button