With the introduction of the new power unit generation, Volkswagen AG also sets new standards in engine repair.
The engines have to be removed with the respective gearbox downwards as one unit. This power unit assembly has a weight of approx. 800kg, which means that the standard engine and gearbox jack cannot be used.
This equipment represents a new removal and installation philosophy which will also be applied for future models. With introduction of the scissor-type assembly platform VAS 6131 A the required removal philosophy in the automobile upper class is taken account of. The engine and gearbox can be removed and installed faster without additional equipment. The use of an A-frame lift assures simple and safe positioning of the assembly platform.
When a vehicle is raised and due to stress-related ageing of the engine and gearbox mountings, there is often a slightly warped or distorted effect on the vehicle and/or power unit. In order that all mounting points can still be reached, the assembly platform can be tilted three-dimensionally by 60 mm. For universal use of the scissor-type assembly platform, there is an engine plate and gearbox plate with locking template. To adapt the equipment to the relevant power unit assembly, the respective supports are bolted to the plates. The gearbox plate can be moved back and forth allowing the engine and gearbox to be separated on the assembly platform without the need for great physical effort.

IMPORTANT NOTE!

The CAB400A power cable is required for the VAS6131A and is not included with the VAS6131A. CAB400A is a extended Power cord for VAS6131A. Comes with connector that mates with VAS6131 female power connection. CAB400A power cable is available in the tools catalog (Tool # CAB400A).

Technical data

Load rating: 1200 kg
Height: 750 mm
Eff. lift: 1050 mm
Quick lift: approx. 45 mm/s
Fine lift: approx. 11 mm/s
Length: approx. 1910 mm
Width: approx. 900 mm
Ground clearance: 150 mm
Control voltage: 24 V DC
Connection lead: 2.2 kW
Weight: 800 kg

Items supplied

Scissor-type ssembly platform with remote control
1 assembly platform, consisting of engine and linear moveable gearbox plates, each featuring a 100 mm locking template (M10).

Recommended accessories

Basic set for Phaeton
VAS 6131/1

Support set for W12 engine Phaeton
VAS 6131/2

Support set for 6-cyl. engines Phaeton
VAS 6131/3

Support set for V10 TDI Phaeton
VAS 6131/4

Basic set for Touareg
VAS 6131/6

V10, V8 and V6 power unit support for Touareg
VAS 6131/8

Support set for Audi
VAS 6131/10

Plate
VAS 6131/10-1

Tapered mounting pin
VAS 6131/10-2

Adapter
VAS 6131/10-9

Adapter
VAS 6131/10-12

Support set, Audi A8 >2002
VAS 6131/11

Adapter
VAS 6131/11-2

Mounting
VAS 6131/11-4

Stud mounting
VAS 6131/11-5

Support set, Audi A6 2005>
VAS 6131/12

Tapered mounting pins
VAS 6131/12-2, ASE 456 042 00 000

Supplementary set, Audi Q7
VAS 6131/13

Gearbox support
VAS 6131/14

Support set for natural gas tank
VAS 6131/15

Warranty

24 months

Manufacturer

Blitz Rotary GmbH

ASE 456 005 01 000

Warranty and Service Contact:
800-445-5438 ext 5310 or 5536 or 5131